How to scan comic books
To scan a comic book, lay it face down on a flatbed scanner, scan every page in color at 300 to 600 ppi, and save the pages as numbered PNG or high-quality JPEG files. Close the lid gently instead of pressing the spine flat, and leave a little of the lid showing around each page. Below: which scanner to use, the exact settings, how to deal with moiré from printed dots, how to scan with a camera, and what to do with the files afterwards.
Which scanner is best for comic books?
A flatbed scanner. You don't need an expensive one: any recent flatbed with a letter or A4 glass (about 8.5 × 11.7 inches) does the job. A modern American comic measures roughly 6.6 × 10.2 inches, and older Golden Age comics are a little wider, so a single page fits on the glass with room to spare. Look for these features rather than a brand:
- Optical resolution of 600 ppi or more. Ignore "interpolated" figures; only the optical number counts.
- A descreen option in the scanner software, to soften the printed dot pattern if you want it gone (more on that below).
- A lid that lifts high or comes off, so a thick trade paperback or a bound volume can lie on the glass without the lid crushing it.
Avoid sheet-fed document scanners and the automatic feeder on an all-in-one printer. They pull the paper through rollers, which tears old newsprint and can't take a stapled comic at all.
The scan settings
Every scanner app has these settings, under different names. Use its advanced or professional mode: the automatic modes crop, sharpen and "fix" colors on their own.
- Resolution: 300 to 600 ppi. At 300 ppi a 10-inch page comes out about 3,000 pixels tall, which is more than any tablet or e-reader shows. Choose 600 ppi for an archive copy, small lettering, or to reduce moiré by scaling down later. Beyond 600, files grow without visible gain.
- Color mode: color (24-bit), even for black-and-white comics. A color scan keeps the paper tone and any spot colors; you can always convert to grayscale later, never the other way.
- File format: PNG or TIFF for the master files, because both are lossless; or JPEG at the highest quality if space is tight. Many comic apps can't open TIFF, so plan to export JPEG or PNG for reading.
- Turn off auto crop, auto color correction, dust removal and unsharp mask for the first test page. Cleaning every page later with the same settings looks more even than letting the scanner guess page by page.
Scanning an issue, step by step
- Clean the glass with a soft, lint-free cloth. Every speck on the glass shows up on every page.
- Open your scanning app. Use the scanner maker's software (for example Epson Scan 2) for the most options. On a Mac, Image Capture works with most scanners: choose the scanner, click Show Details and set the kind, resolution and format. On Windows, the free Windows Scan app covers the basics, and NAPS2, free for Windows, Mac and Linux, adds more control.
- Scan one test page and check it at 100% zoom: sharp lettering, true colors, nothing cut off.
- Place each page the same way: face down, square to the edge of the glass, with a little space around it. Comic Scan Cleaner and other tools find the page by the margin of scanner lid around it, so don't crop tight.
- Scan everything, in order: the front cover, the inside front cover, every page, the inside back cover and the back cover. Ads and letters pages are part of the comic too.
- Name the files with leading zeros as you go:
000.pngfor the cover, then001.png,002.pngand so on. Most scanning apps number files automatically. - Two-page spreads: if a spread fits on the glass, scan it whole. If it doesn't, scan each half and keep them as consecutive pages.
Tip: a sheet of black paper behind the page you're scanning stops the print on the back from showing through, and gives a clean, even border around the page. It works as well as the white lid for automatic cropping.
Moiré and descreening
Printed comics are made of tiny dots of ink (halftone). Those dots can clash with the scanner's own grid and produce a wavy pattern called moiré, most visible in flat colors and skin tones.
Scanner software fixes it with a descreen setting. In Epson Scan 2, for example, it is Descreening on the Advanced Settings tab; other programs usually call it "descreen" too. Epson also suggests changing the resolution if the pattern stays. Descreening blurs the dots away, and with them some fine line work, so it's a trade-off:
- To read on a screen, turn descreening on, or scan at 600 ppi and reduce the image to about half: scaling down blends the dots and usually removes the pattern.
- To archive the comic as printed, leave descreening off and scan at 600 ppi. The dots are part of how the comic looked, and you can always soften them later in a copy.
How not to damage the comic
- Don't force the spine flat. Lower the lid and let its weight rest on the comic. Pressing down with your hand cracks the spine and loosens old staples. A slight shadow near the spine is better than a damaged book.
- Don't remove the staples of a comic you want to keep. Taking a comic apart gives the flattest scans, but it destroys its condition and its value as a collectible.
- Handle pages with clean, dry hands, and turn them from the outer edge, not near the spine.
Scanning with a phone or camera
A camera is the gentler option for bound volumes and fragile comics, because the book only has to open at a gentle angle. To get usable pages:
- Mount the phone or camera on a stand or tripod, pointing straight down, so every page is shot from the same distance and angle.
- Use soft, even light from two sides and no flash: a flash leaves a bright spot on glossy covers.
- Put the comic on a plain dark surface, which makes the page edges easy to find.
- Shoot at full resolution, without filters or "document" modes that turn the page black and white.
Photos come out slightly tilted and with the table around the page. That's normal: Comic Scan Cleaner straightens them, crops away the background, the facing page and the spine's shadow, and evens out the paper. It can't flatten pages that curve near the spine, so keep the book as flat as you can without forcing it.
Scanning original comic art
If you draw comics, your scans start from the art board rather than a printed book, and the board is usually bigger than a letter-size glass. You have three options: an A3 flatbed, which fits most boards in one pass; scanning the board in two overlapping halves and joining them, for example with Photoshop's File > Automate > Photomerge; or a print shop with a large-format scanner.
Scan inked line art at 600 ppi in grayscale, then adjust the levels until the paper is white and the ink is black. Grayscale keeps the soft edges of the lines, which look smoother than a direct black-and-white scan. Scan colored art in color. For the lettering, see the types of speech bubbles and what each one tells the reader. Once your pages are finished and lettered, the Comic & Manga EPUB Kit turns them into a fixed-layout EPUB for Kindle, Apple Books, Kobo and Google Play.
After scanning: clean, package, read
Raw scans almost always need the same fixes: tilt, the scanner lid around the page, yellowed paper and dust. Our free Comic Scan Cleaner cleans a whole issue at once with the same settings, keeps printed colors and halftone dots, and saves a CBZ with the pages in order. It runs in your browser and your scans never leave your computer. The walkthrough, with two public-domain comics to practice on, is in how to clean up scanned comic pages.
Clean your scans in one pass
Comic Scan Cleaner straightens, crops and whitens every page of an issue, removes the dust and saves a CBZ. Free, in your browser.
Open the cleanerSome scans need work first: splitting two-page photos into single pages, or flattening the curve near the spine. ScanTailor does both; see ScanTailor for comics for the settings that keep color pages in color. If you'd rather package the files yourself, how to make a CBZ file covers naming, zipping and adding ComicInfo.xml.
To check the result, open the CBZ in our free online reader. To read it on a Kindle, Kobo or Apple Books, turn it into a fixed-layout EPUB with the CBZ to EPUB converter; the Kindle route is in how to read comics on a Kindle.
Frequently asked questions
What DPI should I scan comics at?
300 ppi is enough for reading on any screen; 600 ppi is better for archiving, small lettering and fine line art. Scanners call it dpi, but for a scan it means the same as ppi: pixels per inch of paper.
Should I scan comics in color or grayscale?
Color, even for black-and-white comics. The file is bigger, but it keeps the paper tone and any colored ink, and converting to grayscale later takes one click. The exception is your own inked line art, which scans well in grayscale.
Can I scan a comic with my phone?
Yes. Hold the phone straight above the page on a stand, use even light without flash, and shoot at full resolution. Then straighten and crop the photos, for example with Comic Scan Cleaner, which handles photos of open books.
Can I share the comics I scan?
Only if you have the rights. Comics in the public domain can be shared freely, and communities such as Comic Book Plus and the Digital Comic Museum collect scans of them. Copyrighted comics are for your own reading.